Atlas Automotive Equipment

Atlas 12ASL Alignment Scissor Lift and RJ-6 Rolling Jack Combo

SKU: ATEATTD-12ASL-COMBOLifting capacity: 12,000 lb
Regular price $21,299.00 Sale price $17,699.00 Save $3,600.00 (17%) Sales tax calculated at checkout. Free shipping.
Free shipping Ships in 1–3 business days · Freight delivery 10–21 business days after dispatch
  • Residential delivery included
  • Liftgate service included
  • The carrier unloads your shipment at delivery

Installation not included. Ask us about options.

Regular price $21,299.00Sale price $17,699.00

Overview

This combo pairs the Atlas 12ASL 12,000 lb scissor alignment lift with an Atlas RJ-6 6,000 lb air/hydraulic rolling jack. The lift has a lifting height of over seven feet, so it can be floor mounted or recessed for a flush installation, and a full frame under the scissor provides stability. Extra-long approach ramps make it easier to load low vehicles.

The alignment system is designed to use a minimum of bay space while handling vehicles from the smallest foreign car up to a one-ton dual rear wheel pickup. Welded rails on the inside of the runways let the RJ-6 rolling jack run on the lift; the RJ-6 is designed to operate on delivered air pressure of 70-105 PSI.

Key features

  • 12,000 lb capacity, commercial grade
  • Built-in slip plates and alignment turntables
  • Open center design for easy access
  • Air-operated single point lock release
  • Rear cross beam for extra stability
  • Precise platform leveling accuracy
  • Separate self-contained control panel
  • Emergency manual pump for lowering
  • 19 locking positions
  • Surface or flush mounting
  • RJ-6 rolling jack: 6,000 lb capacity, air/hydraulic
  • RJ-6 scissor mechanism for level lifting, multiple safety lock positions
  • RJ-6 compact, low-profile design with powder-coated finish

Good to know

  • The lock release and the RJ-6 jack need an external air supply; the RJ-6 operates at 70-105 PSI.
  • Requires 220 volt single-phase power (209-231 volts) with a 30 amp breaker.

Manufacturer warranty

12ASL: 2-year structural, 1-year hydraulic, parts only; RJ-6: 1-year parts only

Full specifications

Dimensions, power and concrete requirements are in the Specs section.

Will it fit my garage?

From the manufacturer's listed specifications
  • 86.4in7 ft 2 inOverall width
  • 250in20 ft 10 inOverall length
  • 84.3in7 ftMax lifting height
  • 220V single-phase, 30 APower requirement

What's included

  • Atlas 12ASL scissor alignment lift
  • Atlas RJ-6 rolling jack
  • Turntable covers
  • Airline kit
  • Rear cross beam
  • Mounting hardware
  • RJ-6 double screw-up adapters
  • RJ-6 4-piece truck adapter set

Contents as listed by the manufacturer. Confirm with the product manual.

Shipping & delivery

Shipping policy
1–3 daysProcessing, business days before dispatch
10–21 daysFreight delivery, business days after dispatch
$0Shipping to all 50 states

Residential delivery

  • Residential delivery is included.
  • A liftgate truck lowers the shipment to the ground.
  • The carrier unloads your shipment at delivery.

Moving the shipment into the garage, assembly and placement are not part of delivery.

Business with forklift or dock

Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.

Delivery-day checklist

  • Clear access for the truck and a flat spot to set the shipment down.
  • Have help or equipment ready to move heavy parts.
  • Count the pieces and inspect packaging before signing.
  • Note any visible damage on the delivery receipt.

If something arrives damaged

Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.

No express shipping, no pickup. We ship to the 50 US states only.

Installation not included. Ask us about options.

How scheduling works

  1. Place your order.
  2. Answer a short site questionnaire: ceiling, bay, concrete, power, photos.
  3. We confirm eligibility, your location and site requirements.
  4. We schedule the install. Installation is performed by a manufacturer-authorized installer where required.

Site requirements

  • Bay width: lift is 7 ft 2 in wide
  • Power: 220V single-phase, 30 A

From the product's listed specifications. Confirm with the installation manual.

Specifications

General
BrandAtlas Automotive Equipment
Model / SKUATEATTD-12ASL-COMBO
CategoryCombo
Lifting capacity12,000 lb
ShippingFreight, free
Capacity
Lifting capacity12,000 lb
Lifting
Lifting height84 1/4" (7' 1/4")
Lowered height11 1/2"
Locking positions19
Dimensions
Overall width86 3/8" (7' 2 3/8")
Overall length with approach ramps250" (20' 10")
Overall length without approach ramps197" (16' 5")
Approach ramp length53" (4' 5")
Runway width23 3/4" (1' 11 3/4")
Width between runways39"
4-wheel alignment wheelbasemax. 168 in., min. 90 in.
2-wheel alignment wheelbasemax. 172 in., min. 86 in.
Power
Motor/electrical requirement220 volt +/- 5% (209-231 volts) single (1) phase; a 30 amp breaker is required
Air supplyexternal air supply required for the lock release
Installation
Mountingsurface mounted or flush mounted
Shipping & warranty
Shipping weight5000 lb
Warranty2 yr structural, 1 yr hydraulic, parts only
RJ-6 rolling jack
Maximum capacity6,000 lb
Maximum width64 1/2"
Minimum width30 1/2"
First locking position7 1/4"
Second locking position15"
Minimum pad height3 1/2"
Maximum lifting height17 5/8"
Recommended operating air pressure70-105 PSI
Shipping weight350 lb
Warranty1 year parts only
General
Lift model12ASL
Jack modelRJ-6

Manuals & certifications