Atlas 12AWFSL Alignment Scissor Lift and RJ-6 Rolling Jack Combo
Lifting capacity: 12,000 lb
Installation not included. Ask us about options.
This combo pairs the Atlas 12AWFSL 12,000 lb scissor alignment lift, which has a built-in Wheels Free lifting system, with an Atlas RJ-6 6,000 lb air/hydraulic rolling jack. The lift has a lifting height of over seven feet, so it can be floor mounted or recessed for a flush installation, and a full frame under the scissor provides stability. Extra-long approach ramps make it easier to load low vehicles.
The alignment system is designed to use a minimum of bay space while handling vehicles from the smallest foreign car up to a one-ton dual rear wheel pickup. Welded rails on the inside of the runways let the RJ-6 rolling jack run on the lift; the RJ-6 is designed to operate on delivered air pressure of 70-105 PSI.
Good to know
12AWFSL: 2-year structural, 1-year hydraulic, parts only; RJ-6: 1-year parts only
Dimensions, power and concrete requirements are in the Specs section.
Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.
Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.
Installation not included. Ask us about options.
| Brand | Atlas Automotive Equipment |
|---|---|
| Model / SKU | ATEATTD-12AWFSL-COMBO |
| Category | Combo |
| Lifting capacity | 12,000 lb |
| Shipping | Freight, free |
| Lifting capacity | 12,000 lb |
|---|
| Lifting height | 84 1/4" (7' 1/4") |
|---|---|
| Wheels Free in-ramp jack system height | 17" (1' 5") |
| Lowered height | 11 1/2" |
| Locking positions | 19 |
| Overall width | 86 3/8" (7' 2 3/8") |
|---|---|
| Overall length with approach ramps | 250" (20' 10") |
| Overall length without approach ramps | 197" (16' 5") |
| Approach ramp length | 53" (4' 5") |
| Runway width | 23 3/4" (1' 11 3/4") |
| Width between runways | 39" |
| 4-wheel alignment wheelbase | max. 168 in., min. 90 in. |
| 2-wheel alignment wheelbase | max. 172 in., min. 86 in. |
| Motor/electrical requirement | 220 volt +/- 5% (209-231 volts) single (1) phase; a 30 amp breaker is required |
|---|---|
| Air supply | external air supply required for the lock release |
| Mounting | surface mounted or flush mounted |
|---|
| Shipping weight | 5500 lb |
|---|---|
| Warranty | 2 yr structural, 1 yr hydraulic, parts only |
| Maximum capacity | 6,000 lb |
|---|---|
| Maximum width | 64 1/2" |
| Minimum width | 30 1/2" |
| First locking position | 7 1/4" |
| Second locking position | 15" |
| Minimum pad height | 3 1/2" |
| Maximum lifting height | 17 5/8" |
| Recommended operating air pressure | 70-105 PSI |
| Shipping weight | 350 lb |
| Warranty | 1 year parts only |
| Lift model | 12AWFSL |
|---|---|
| Jack model | RJ-6 |
Lifting capacity: 12,000 lb
Your cart is empty.
Shop car lifts