Atlas Automotive Equipment

Atlas 412 12,000 lb 4-Post Lift + RJ6 Jacks Combo

SKU: ATEATTD-412-COMBOLifting capacity: 12,000 lb
Regular price $11,999.00 Sale price $9,998.65 Save $2,000.35 (17%) Sales tax calculated at checkout. Free shipping.
Free shipping Ships in 1–3 business days · Freight delivery 10–21 business days after dispatch
  • Residential delivery included
  • Liftgate service included
  • The carrier unloads your shipment at delivery

Installation not included. Ask us about options.

Regular price $11,999.00Sale price $9,998.65

Overview

This combo pairs the Atlas 412 12,000 lb commercial grade four-post lift with two Atlas RJ6 rolling bridge jacks. The 412 raises and lowers with a high-strength cable system and an oversized hydraulic cylinder under the runway, powered by a 220 volt single-phase power unit; the manufacturer notes this avoids the leveling problems and exposed cylinders (a cause of door dings) of older chain-drive designs.

The 412 is tested to perform at its rated capacity and has been built to the same specifications for many years. The RJ6 jacks raise a vehicle's wheels off the runways for tire and brake service.

Key features

  • 12,000 lb capacity
  • Heavy-duty, commercial grade
  • Extra tall, extra wide and extra long
  • Diamond plated runways
  • Cable lift system with oversized under-runway hydraulic cylinder
  • Air-operated single point lock release
  • Lock ladder design with double lock safety system
  • Powder coat finish
  • Two RJ6 rolling bridge jacks, 6,000 lb capacity each
  • RJ6 air/hydraulic operation with multiple safety lock positions
  • RJ6 scissor mechanism for level lifting
  • RJ6 compact, low-profile design

Good to know

  • The lock release and the RJ6 jacks need an external air supply (85-115 PSI for the lift, 70-115 PSI for the jacks).
  • Requires 220 volt single-phase power; the features list says a 30 amp breaker is required, the spec table says it is recommended.
  • Hydraulic oil is not included: the lift needs 3-5 gallons of AW32 or AW46.
  • Requires a minimum of 6" of concrete rated 3000 psi.
  • Additional drive-off ramps and runway extensions are available separately.

Manufacturer warranty

412: 5-year structural, 2-year hydraulic, parts only; RJ6: 1-year parts only

Full specifications

Dimensions, power and concrete requirements are in the Specs section.

Will it fit my garage?

From the manufacturer's listed specifications
  • 89.8in7 ft 6 inOverall height
  • 135.3in11 ft 3 inOverall width
  • 236.5in19 ft 9 inOverall length
  • 98in8 ft 2 inDrive-through width
  • 112.6in9 ft 5 inWidth between columns
  • 77.8in6 ft 6 inMax lifting height
  • 220V single-phase, 30 APower requirement
  • 6 in, 3,000 PSIMinimum concrete

What's included

  • Two Atlas RJ6 rolling bridge jacks
  • Steel approach ramps
  • Mounting hardware
  • RJ6 4-piece truck adapter set

Contents as listed by the manufacturer. Confirm with the product manual.

Shipping & delivery

Shipping policy
1–3 daysProcessing, business days before dispatch
10–21 daysFreight delivery, business days after dispatch
$0Shipping to all 50 states

Residential delivery

  • Residential delivery is included.
  • A liftgate truck lowers the shipment to the ground.
  • The carrier unloads your shipment at delivery.

Moving the shipment into the garage, assembly and placement are not part of delivery.

Business with forklift or dock

Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.

Delivery-day checklist

  • Clear access for the truck and a flat spot to set the shipment down.
  • Have help or equipment ready to move heavy parts.
  • Count the pieces and inspect packaging before signing.
  • Note any visible damage on the delivery receipt.

If something arrives damaged

Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.

No express shipping, no pickup. We ship to the 50 US states only.

Installation not included. Ask us about options.

How scheduling works

  1. Place your order.
  2. Answer a short site questionnaire: ceiling, bay, concrete, power, photos.
  3. We confirm eligibility, your location and site requirements.
  4. We schedule the install. Installation is performed by a manufacturer-authorized installer where required.

Site requirements

  • Bay width: lift is 11 ft 3 in wide
  • Power: 220V single-phase, 30 A
  • Concrete: 6 in, 3,000 PSI

From the product's listed specifications. Confirm with the installation manual.

Specifications

General
BrandAtlas Automotive Equipment
Model / SKUATEATTD-412-COMBO
CategoryCombo
Lifting capacity12,000 lb
ShippingFreight, free
Capacity
Capacity12,000 lb
Lifting
Lifting height77 3/4" (6' 5 3/4")
Clearance under runways70 1/4" (5' 10 1/4")
Dimensions
Height of columns89 3/4" (7' 5 3/4")
Overall width of columns (without motor)126 1/4" (10' 6 1/4")
Overall width of columns (with motor)135 1/4" (11' 3 1/4")
Overall length with approach ramp236 1/2" (19' 8 1/2")
Length between columns183 1/4" (15' 3 1/4")
Clearance between columns112 5/8" (9' 4 5/8")
Runway length194 1/2" (16' 2 1/2")
Runway width20"
Runway thickness7 1/2"
Width between runways43 1/4" (with rail 39 3/4")
Outside runway to outside runway83 1/4" (6' 11 1/4")
Maximum wheelbase185" (15' 5")
Drive-thru98" (8' 2")
Power
Air requirement85-115 PSI (external air supply required)
Motor/electrical requirement220 volt single (1) phase; a 30 amp breaker is recommended
Oil requirement3-5 gallons AW32/AW46 (not included)
Installation
Concreteminimum 6" with a 3000 psi rating
Shipping & warranty
Shipping weight2,800 lb
Warranty5 yr structural, 2 yr hydraulic, parts only
RJ6 rolling jack
Maximum capacity6,000 lb
Maximum width55" (4' 7")
Minimum width35" (2' 11")
Distance between runway capability32"-52"
Maximum lifting height (with adapters)21" (1' 9")
Air requirement70-115 PSI
Adapter heights2 each 2", 3"
Arm hole/adapter peg size1.5"
Shipping weight350 lb
Warranty1 year parts only
General
Lift modelATTD-412
Jack modelRJ6

Manuals & certifications