Atlas 412 12,000 lb Commercial 4-Post Lift
Lifting capacity: 12,000 lb
Installation not included. Ask us about options.
The Atlas 412 is a 12,000 lb commercial grade four-post lift. It raises and lowers with a high-strength cable system and an oversized hydraulic cylinder under the runway, powered by a 220 volt single-phase power unit; the manufacturer notes this avoids the leveling problems and exposed cylinders (a cause of door dings) of older chain-drive designs.
The 412 is tested to perform at its rated capacity and has been built to the same specifications for many years. Tracks between the runways allow a rolling bridge jack such as the Atlas RJ6BK to be used on the lift.
Good to know
5-year structural, 2-year hydraulic, parts only
Dimensions, power and concrete requirements are in the Specs section.
Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.
Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.
Installation not included. Ask us about options.
| Brand | Atlas Automotive Equipment |
|---|---|
| Model / SKU | ATEATTD-412 |
| Category | Four Post Lifts |
| Lifting capacity | 12,000 lb |
| Shipping | Freight, free |
| Capacity | 12,000 lb |
|---|
| Lifting height | 77 3/4" (6' 5 3/4") |
|---|---|
| Clearance under runways | 70 1/4" (5' 10 1/4") |
| Height of columns | 89 3/4" (7' 5 3/4") |
|---|---|
| Overall width of columns (without motor) | 126 1/4" (10' 6 1/4") |
| Overall width of columns (with motor) | 135 1/4" (11' 3 1/4") |
| Overall length with approach ramp | 236 1/2" (19' 8 1/2") |
| Length between columns | 183 1/4" (15' 3 1/4") |
| Clearance between columns | 112 5/8" (9' 4 5/8") |
| Runway length | 194 1/2" (16' 2 1/2") |
| Runway width | 20" |
| Runway thickness | 7 1/2" |
| Width between runways | 43 1/4" (with rail 39 3/4") |
| Outside runway to outside runway | 83 1/4" (6' 11 1/4") |
| Maximum wheelbase | 185" (15' 5") |
| Drive-thru | 98" (8' 2") |
| Air requirement | 85-115 PSI (external air supply required) |
|---|---|
| Motor/electrical requirement | 220 volt single (1) phase; a 30 amp breaker is recommended |
| Oil requirement | 3-5 gallons AW32/AW46 (not included) |
| Concrete | minimum 6" with a 3000 psi rating |
|---|
| Shipping weight | 2,800 lb |
|---|---|
| Warranty | 5 yr structural, 2 yr hydraulic, parts only |
| Model | ATTD-412 |
|---|
Lifting capacity: 12,000 lb
Your cart is empty.
Shop car lifts