Atlas Automotive Equipment

Atlas 412A 12,000 lb 4-Post Alignment Lift

SKU: ATEATTD-412A-KITLifting capacity: 12,000 lb
Regular price $11,899.00 Sale price $9,849.00 Save $2,050.00 (17%) Sales tax calculated at checkout. Free shipping.
Free shipping Ships in 1–3 business days · Freight delivery 10–21 business days after dispatch
  • Residential delivery included
  • Liftgate service included
  • The carrier unloads your shipment at delivery

Installation not included. Ask us about options.

Regular price $11,899.00Sale price $9,849.00

Overview

The Atlas 412A is a 12,000 lb four-post alignment lift built to commercial grade standards. It uses a high-strength cable system with an oversized hydraulic cylinder under the runway, powered by a 220 volt single-phase power unit; the manufacturer notes this avoids the leveling problems and exposed cylinders of older chain-drive designs, and the lift is tested to perform at its rated capacity.

It has the heavy-duty features of the Atlas 412, including tracks between the runways for a rolling bridge jack such as the Atlas RJ6BK, plus built-in slip plates and alignment turntables. The slip plates are level with the turntables, the turntables can be set in different positions to suit a range of wheelbases, and metal cover plates replace the turntables when they are not in use, so the lift can be used for more than alignments.

Key features

  • 12,000 lb capacity
  • Heavy-duty, commercial grade
  • Extra tall, extra wide and extra long
  • Built-in slip plates and alignment turntables
  • Multiple turntable positions for different wheelbases
  • Runway covers for use when turntables are removed
  • Cable lift system with oversized under-runway hydraulic cylinder
  • Air-operated single point lock release
  • Lock ladder design
  • Double lock safety system
  • Powder coat finish
  • Tracks between runways for a rolling bridge jack

Good to know

  • Rolling jacks are sold separately; additional drive-off ramps and runway extensions are also available separately.
  • The single point lock release needs an external air supply of 85-115 PSI.
  • Requires 220 volt single-phase power; the features list says a 30 amp breaker is required, the spec table says it is recommended.
  • Hydraulic oil is not included: the lift needs 3-5 gallons of AW32 or AW46.
  • Requires a minimum of 6" of concrete rated 3000 psi. Bleed the cylinder immediately after installation, following the cylinder bleeding procedure.

Manufacturer warranty

5-year structural, 2-year hydraulic, parts only

Full specifications

Dimensions, power and concrete requirements are in the Specs section.

Will it fit my garage?

From the manufacturer's listed specifications
  • 89.8in7 ft 6 inOverall height
  • 135.3in11 ft 3 inOverall width
  • 236.5in19 ft 9 inOverall length
  • 98in8 ft 2 inDrive-through width
  • 112.6in9 ft 5 inWidth between columns
  • 77.8in6 ft 6 inMax lifting height
  • 220V single-phase, 30 APower requirement
  • 6 in, 3,000 PSIMinimum concrete

What's included

  • Built-in slip plates and alignment turntables
  • Runway covers (for use when turntables are removed)
  • Steel approach ramps
  • Mounting hardware

Contents as listed by the manufacturer. Confirm with the product manual.

Shipping & delivery

Shipping policy
1–3 daysProcessing, business days before dispatch
10–21 daysFreight delivery, business days after dispatch
$0Shipping to all 50 states

Residential delivery

  • Residential delivery is included.
  • A liftgate truck lowers the shipment to the ground.
  • The carrier unloads your shipment at delivery.

Moving the shipment into the garage, assembly and placement are not part of delivery.

Business with forklift or dock

Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.

Delivery-day checklist

  • Clear access for the truck and a flat spot to set the shipment down.
  • Have help or equipment ready to move heavy parts.
  • Count the pieces and inspect packaging before signing.
  • Note any visible damage on the delivery receipt.

If something arrives damaged

Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.

No express shipping, no pickup. We ship to the 50 US states only.

Installation not included. Ask us about options.

How scheduling works

  1. Place your order.
  2. Answer a short site questionnaire: ceiling, bay, concrete, power, photos.
  3. We confirm eligibility, your location and site requirements.
  4. We schedule the install. Installation is performed by a manufacturer-authorized installer where required.

Site requirements

  • Bay width: lift is 11 ft 3 in wide
  • Power: 220V single-phase, 30 A
  • Concrete: 6 in, 3,000 PSI

From the product's listed specifications. Confirm with the installation manual.

Specifications

General
BrandAtlas Automotive Equipment
Model / SKUATEATTD-412A-KIT
CategoryFour Post Lifts
Lifting capacity12,000 lb
ShippingFreight, free
Capacity
Capacity12,000 lb
Lifting
Lifting height77 3/4" (6' 5 3/4")
Clearance under runways70 1/4" (5' 10 1/4")
Dimensions
Height of columns89 3/4" (7' 5 3/4")
Overall width of columns (without motor)126 1/4" (10' 6 1/4")
Overall width of columns (with motor)135 1/4" (11' 3 1/4")
Overall length with approach ramp236 1/2" (19' 8 1/2")
Length between columns183 1/4" (15' 3 1/4")
Clearance between columns112 5/8" (9' 4 5/8")
Runway length194 1/2" (16' 2 1/2")
Runway width20"
Runway thickness7 1/2"
Width between runways43 1/4" (with rail 39 3/4")
Outside runway to outside runway83 1/4" (6' 11 1/4")
Maximum wheelbase185" (15' 5")
Drive-thru98" (8' 2")
Power
Air requirement85-115 PSI (external air supply required)
Motor/electrical requirement220 volt single (1) phase; a 30 amp breaker is recommended
Oil requirement3-5 gallons AW32/AW46 (not included)
Installation
Concreteminimum 6" with a 3000 psi rating
Shipping & warranty
Shipping weight2,900 lb
Warranty5 yr structural, 2 yr hydraulic, parts only
General
ModelATTD-412A

Manuals & certifications