Atlas Automotive Equipment

Atlas 414 14,000 lb Commercial 4-Post Lift

SKU: ATEATTD-414Lifting capacity: 14,000 lb
Regular price $9,799.00 Sale price $8,149.00 Save $1,650.00 (17%) Sales tax calculated at checkout. Free shipping.
Free shipping Ships in 1–3 business days · Freight delivery 10–21 business days after dispatch
  • Residential delivery included
  • Liftgate service included
  • The carrier unloads your shipment at delivery

Installation not included. Ask us about options.

Regular price $9,799.00Sale price $8,149.00

Overview

The Atlas 414 is a 14,000 lb heavy-duty four-post lift built to commercial grade standards. It raises and lowers with a high-strength cable system and an oversized hydraulic cylinder under the runway, powered by a 220 volt single-phase power unit; the manufacturer notes this avoids the leveling problems and exposed cylinders (a cause of door dings) of older chain-drive designs.

The 414 is tested to perform at its rated capacity and has been built to the same specifications for many years. Tracks between the runways allow a rolling bridge jack such as the Atlas RJ8000BK to be used on the lift.

Key features

  • 14,000 lb capacity
  • Heavy-duty, commercial grade
  • Extra tall, extra wide and extra long
  • Diamond plated runways
  • Cable lift system with oversized under-runway hydraulic cylinder
  • Air-operated single point lock release
  • Lock ladder design
  • Double lock safety system
  • Powder coat finish
  • Tracks between runways for a rolling bridge jack

Good to know

  • Rolling jacks are sold separately; additional drive-off ramps and runway extensions are also available separately.
  • The single point lock release needs an external air supply of 85-115 PSI.
  • Requires 220 volt single-phase power; the features list says a 30 amp breaker is required, the spec table says it is recommended.
  • Hydraulic oil is not included: the lift needs 3-5 gallons of AW32 or AW46.
  • Requires a minimum of 6" of concrete rated 3000 psi. Bleed the cylinder immediately after installation, following the cylinder bleeding procedure.

Manufacturer warranty

5-year structural, 2-year hydraulic, parts only

Full specifications

Dimensions, power and concrete requirements are in the Specs section.

Will it fit my garage?

From the manufacturer's listed specifications
  • 91.1in7 ft 7 inOverall height
  • 138.9in11 ft 7 inOverall width
  • 255in21 ft 3 inOverall length
  • 102.1in8 ft 6 inDrive-through width
  • 116in9 ft 8 inWidth between columns
  • 80in6 ft 8 inMax lifting height
  • 220V single-phase, 30 APower requirement
  • 6 in, 3,000 PSIMinimum concrete

What's included

  • Steel approach ramps
  • Mounting hardware

Contents as listed by the manufacturer. Confirm with the product manual.

Shipping & delivery

Shipping policy
1–3 daysProcessing, business days before dispatch
10–21 daysFreight delivery, business days after dispatch
$0Shipping to all 50 states

Residential delivery

  • Residential delivery is included.
  • A liftgate truck lowers the shipment to the ground.
  • The carrier unloads your shipment at delivery.

Moving the shipment into the garage, assembly and placement are not part of delivery.

Business with forklift or dock

Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.

Delivery-day checklist

  • Clear access for the truck and a flat spot to set the shipment down.
  • Have help or equipment ready to move heavy parts.
  • Count the pieces and inspect packaging before signing.
  • Note any visible damage on the delivery receipt.

If something arrives damaged

Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.

No express shipping, no pickup. We ship to the 50 US states only.

Installation not included. Ask us about options.

How scheduling works

  1. Place your order.
  2. Answer a short site questionnaire: ceiling, bay, concrete, power, photos.
  3. We confirm eligibility, your location and site requirements.
  4. We schedule the install. Installation is performed by a manufacturer-authorized installer where required.

Site requirements

  • Bay width: lift is 11 ft 7 in wide
  • Power: 220V single-phase, 30 A
  • Concrete: 6 in, 3,000 PSI

From the product's listed specifications. Confirm with the installation manual.

Specifications

General
BrandAtlas Automotive Equipment
Model / SKUATEATTD-414
CategoryFour Post Lifts
Lifting capacity14,000 lb
ShippingFreight, free
Capacity
Capacity14,000 lb
Lifting
Lifting height80" (6' 8")
Clearance under runways71 1/4" (5' 11 1/4")
Dimensions
Height of columns91 1/8" (7' 7 1/8")
Overall width of columns (without motor)130 7/8" (10' 10 7/8")
Overall width of columns (with motor)138 7/8" (11' 6 7/8")
Overall length with approach ramp255" (21' 3")
Length between columns197 1/4" (16' 5 1/4")
Clearance between columns116" (9' 8")
Runway length208 5/8" (17' 4 5/8")
Runway width20"
Runway thickness8 3/4"
Width between runways46 7/8" (with rail 44 3/8")
Outside runway to outside runway86 7/8" (7' 2 7/8")
Maximum wheelbase197" (16' 5")
Drive-thru102 1/8" (8' 6 1/8")
Power
Air requirement85-115 PSI (external air supply required)
Motor/electrical requirement220 volt single (1) phase; a 30 amp breaker is recommended
Oil requirement3-5 gallons AW32/AW46 (not included)
Installation
Concreteminimum 6" with a 3000 psi rating
Shipping & warranty
Shipping weight3,100 lb
Warranty5 yr structural, 2 yr hydraulic, parts only
General
ModelATTD-414

Manuals & certifications