Atlas 9KBPX 9,000 lb Baseplate 2 Post Lift w/ LMA Combo
Lifting capacity: 9,000 lb
Installation not included. Ask us about options.
This combo pairs the Atlas 9KBPX 9,000 lb baseplate two-post lift with the Atlas Lawn Mower Adapter (LMA). The 9KBPX has a total column height of 111 1/2" (9' 3 1/2"), so it fits garages with ceilings as low as 9' 6". It is a chain-over-roller lift with dual chain-drive cylinders, symmetric arms, automatic arm restraints and a spring-loaded Secondary Lock System (SLS) that engages automatically if a chain goes slack or breaks.
It is meant for homeowners and small commercial shops servicing cars, SUVs and light-duty trucks; it is not recommended for diesel duallys or other large trucks. The LMA lets the lift better handle ATVs, UTVs and lawn mowers and adjusts along the arms for different wheelbases. Its capacity depends on where the plates are positioned (higher closer to the columns) and on the vehicle's weight balance.
Good to know
9KBPX: 2-year structural, 1-year hydraulic, parts only
Dimensions, power and concrete requirements are in the Specs section.
Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.
Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.
Installation not included. Ask us about options.
| Brand | Atlas Automotive Equipment |
|---|---|
| Model / SKU | ATEXH-9KBPX-COMBO |
| Category | Combo |
| Lifting capacity | 9,000 lb |
| Shipping | Freight, free |
| Capacity | 9,000 lb |
|---|
| Maximum lift height (without adapters) | 74 1/2" |
|---|---|
| Maximum lift height (with adapters) | 81" |
| Minimum arm height | 4" |
| Overall height | 111 1/2" (9' 3 1/2") |
|---|---|
| Overall floor width | 134 1/2" (11' 2 1/2") |
| Outside column to outside column | 124 7/8" (10' 4 7/8") |
| Inside column | 110" (9' 2") |
| Drive-thru | 101" (8' 5") |
| Column size | 7 1/4" x 11" |
| Column steel thickness | 5mm |
| Base of lift | 14 1/4" x 18 1/4" |
| Motor/electrical requirement | 220 volt single (1) phase; a 30 amp breaker is recommended |
|---|---|
| Oil requirement | 3-5 gallons AW32/AW46 (not included) |
| Concrete | minimum 4" with a 3000 psi rating |
|---|---|
| Minimum ceiling height | 9' 6" |
| Adapter heights | 4 each 1.5", 5" |
|---|---|
| Arm hole/adapter peg size | 1.5" |
| Shipping weight | 1,400 lb |
|---|---|
| Warranty | 2 yr structural, 1 yr hydraulic, parts only |
| Capacity | up to 5,000 lb (may vary depending on lift and weight distribution; longer vehicle wheelbases lower the LMA's capacity) |
|---|---|
| Adjusts in width | 8' 11" |
| Wheelbase | 32" to 90" (may require blocks and/or shims on the lift arms to keep the wheel platforms stable and level) |
| Wheel well width | 12" |
| Steel thickness | 1/4" (2 gauge) |
| Construction | two wheel platforms |
| Shipping weight | 600 lb |
| Lift model | XH-9KBPX |
|---|
Lifting capacity: 9,000 lb
Your cart is empty.
Shop car lifts