Atlas 9KOHX 9,000 lb Overhead 2-Post Lift w/ LMA Combo
Lifting capacity: 9,000 lb
Installation not included. Ask us about options.
This combo pairs the Atlas 9KOHX light-duty, 9,000 lb overhead, clear-floor two-post lift with the Atlas Lawn Mower Adapter (LMA). The 9KOHX is meant for homeowners and small commercial shops servicing cars, SUVs and light-duty trucks; its height can be set to either 11' 6" or 11' 10", and its symmetric columns take arms that can be set in the symmetric or asymmetric position, with a very low lift pad position for small cars with low pick-up points as well as heavier pickup trucks.
As a chain-over-roller lift, it has a spring-loaded Secondary Lock System (SLS) that engages automatically if a chain goes slack or breaks. The LMA lets the lift better handle ATVs, UTVs and lawn mowers and adjusts along the arms for different wheelbases; its capacity depends on where the plates are positioned (higher closer to the columns) and on the vehicle's weight balance.
Good to know
9KOHX: 2-year structural, 1-year hydraulic, parts only
Dimensions, power and concrete requirements are in the Specs section.
Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.
Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.
Installation not included. Ask us about options.
| Brand | Atlas Automotive Equipment |
|---|---|
| Model / SKU | ATEXH-9KOHX-COMBO |
| Category | Combo |
| Lifting capacity | 9,000 lb |
| Shipping | Freight, free |
| Capacity | 9,000 lb |
|---|
| Maximum lift height (without adapters) | 74 1/2" |
|---|---|
| Maximum lift height (with adapters) | 81" |
| Minimum arm height | 4" |
| Overall height | 138" (11' 6") or 142" (11' 10") |
|---|---|
| Overall floor width | 134 1/2" (11' 2 1/2") |
| Outside column to outside column | 124 7/8" (10' 4 7/8") |
| Inside column | 110" (9' 2") |
| Drive-thru | 100" (8' 4") symmetric / 90 1/2" (7' 6 1/2") asymmetric |
| Column size | 7 1/4" x 11" |
| Column steel thickness | 5mm |
| Base of lift | 14 1/4" x 18" |
| Motor/electrical requirement | 220 volt single (1) phase; a 30 amp breaker is recommended |
|---|---|
| Oil requirement | 3-5 gallons AW32/AW46 (not included) |
| Concrete | minimum 4" with a 3000 psi rating |
|---|
| Adapter heights | 4 each 1.5", 5" |
|---|---|
| Arm hole/adapter peg size | 1.5" |
| Shipping weight | 1,450 lb |
|---|---|
| Warranty | 2 yr structural, 1 yr hydraulic, parts only |
| Capacity | up to 5,000 lb (may vary depending on lift and weight distribution; longer vehicle wheelbases lower the LMA's capacity) |
|---|---|
| Adjusts in width | 8' 11" |
| Wheelbase | 32" to 90" (may require blocks and/or shims on the lift arms to keep the wheel platforms stable and level) |
| Wheel well width | 12" |
| Steel thickness | 1/4" (2 gauge) |
| Construction | two wheel platforms |
| Shipping weight | 600 lb |
| Lift model | 9KOHX |
|---|
Lifting capacity: 9,000 lb
Your cart is empty.
Shop car lifts