Atlas ALI Certified APEX 8 4 Post Lift + RJ35 Sliding Jacks Combo
Lifting capacity: 8,000 lb
Installation not included. Ask us about options.
This combo pairs the Atlas APEX8 8,000 lb four-post hobbyist lift with two Atlas RJ35 sliding bridge jacks. The APEX8 is a version of the Atlas Garage PRO8000 that lets most passenger cars be stacked to double parking space. It is designed for homeowners and restoration shops and is not recommended for commercial repair shops where it would be raised and lowered several times a day.
The manufacturer states it is nearly 200 lb heavier than comparable lifts. An included caster kit with polyurethane wheels installs or removes in minutes, so the lift can be moved between bays or even outside. The RJ35 jacks raise a vehicle's wheels off the runways for tire and brake service.
Good to know
APEX8: 5-year structural, 2-year hydraulic, parts only; RJ35: 1-year parts only
Dimensions, power and concrete requirements are in the Specs section.
Recommended for heavy units. A forklift or loading dock makes unloading faster and safer for long, heavy pallets.
Contact support with your order number and photos of the damage and packaging: support@autoliftwarehouse.com or +1 (847) 948-2563.
Installation not included. Ask us about options.
| Brand | Atlas Automotive Equipment |
|---|---|
| Model / SKU | ATEATTD-APEX8-COMBO |
| Category | Combo |
| Lifting capacity | 8,000 lb |
| Shipping | Freight, free |
| Capacity | 8,000 lb |
|---|
| Lifting height to top of runway | 72" (6') |
|---|---|
| Clearance under runways | 67" (5' 7") |
| Height of columns (including nuts) | 86 5/8" (7' 2 5/8") |
|---|---|
| Overall width (without motor or casters) | 104" (8' 8") |
| Overall width (with motor) | 114" (9' 6") |
| Overall length without approach ramps (including lock release bar) | 186 1/2" (15' 6 1/2") |
| Overall length with approach ramps | 207 5/6" (17' 3 5/6") |
| Approach ramps | 37 1/2" (3' 1 1/2") |
| Runway width | 18 2/3" |
| Runway rail width | 2 1/2" |
| Runway length | 169 1/2" (14' 1 1/2") |
| Runway thickness | 4 1/3" |
| Width between runways | 38" (3' 2") |
| Width between runway rails | 33" (2' 9") |
| Outside runway to outside runway | 75 1/4" (6' 3 1/4") |
| Clearance between columns | 94" (7' 10") |
| Length between columns | 157 1/3" (13' 1 1/3") |
| Maximum wheelbase | 154" (12' 9") |
| Drive-thru (outside of tire to outside of tire) | 80 1/4" (6' 8 1/4") |
| Motor/electrical requirement | 110 volt, 30 amp breaker required |
|---|
| Shipping weight | 2,000 lb |
|---|---|
| Warranty | 5 yr structural, 2 yr hydraulic, parts only |
| Maximum capacity | 3,500 lb |
|---|---|
| Maximum width | 64 3/4" (5' 4 3/4") |
| Minimum width | 29 1/2" (2' 5 1/2") |
| Minimum height with lift pad above runway | 3 1/2" (may vary by lift) |
| Lift pad height above arm | 1 3/8" |
| Maximum raised height without adapters | 11" |
| Maximum raised height with adapters | 17 1/4" |
| Adapter heights | 2 each 1.5", 5" |
| Arm hole/adapter peg size | 1.5" |
| Operation | manual, hand pump |
| Shipping weight | 350 lb |
| Warranty | 1 year parts only |
| Lift model | APEX8 (Apex 8) |
|---|---|
| Jack model | RJ35 (also listed as PROJACK35) |
Lifting capacity: 8,000 lb
Your cart is empty.
Shop car lifts